How to Strip Paint from Metal

How to Strip Paint from Metal? When it is time to strip the paint, many professional  depend on chemical process to assist them. The chemical is specially designed for stripping paint for most part. Many people proper to hire professional painter for stripping the paint, but with these tips people will know how to strip paint from metal with smooth process.

how to strip paint from metal door

how to strip paint from metal door

How to Strip Paint from Metal

First, people have to get the surface ready by masking off the areas that you do not want stripped. You must make sure that you use a good masking tape and mask well any opening or crevices that stripper could get into. If you do not consider this, stripper could easily surface up into the new paint just recently applied. There are many good chemical available in the market. You should to follow all the manufacture direction exactly. Some striper is in liquid form while others are in a paste form. You must use a chemical resistant paintbrush to apply it with otherwise you could end up with a melted brush. When you apply the chemical, apply it in one direction and do not work too much because can reduce its activity.

how to strip paint from metal

how to strip paint from metal

Second, one you have your stripper on then covers it with polyethylene about 3 ml thicknesses. Then secure all around the edges. The chemical component in the stripper is responsible for softening up the paint evaporate quickly. You can leave it up 2 hours for tough job. Another touch as well is with 40-60 grade sandpaper rough up the surface of the paint enough to break through the paint film then apply the stripper. Last, remove the polyethylene, scrape, and then use steel wool to get into the crevices. Make sure all of the stripper residue is removed before proceeding. Some strippers you can rinse with water, but read the manufactures directions according to the product you are using.

how to strip paint from metal railing

how to strip paint from metal railing

Another guide on how to strip paint from metal is easy to be followed. Preparing a surface properly before you start painting is the first step in achieving professional finish when attempting any paint work. All surface will need to be dry, clean and stable before you apply any paint.  Any problem areas need to be treated properly and all damages repaired before hand as well. To prepare a surface for painting, you must remove all dirt and grease with white spirit on lint-free cloth. You may use a zinc chromate primer or use an etching solution followed by calcium plumbate primer.  You need to clean damaged areas with turps and then apply some cold galvanizing paint to any damaged parts. You will either be need to prepare new iron or steel surface or will be looking at preparing some old rusted metalwork for painting.  You may use emery paper to remove any visible rust and wipe the whole surface clean.  Apply good metal primer in a coat as thin as possible.

Another option would be to use cold galvanizing paint which will act as rust inhibitor and primer. If you are going to need to prepare any older rusted iron, steel for fresh coat of paint. You will need to remove all rsut using your wire brush and some emery paper. You should always be wearing safety goggles and leather gloves to protect yourself when preparing any metalwork painting.

Leave a Reply

Your email address will not be published. Required fields are marked *

You might also likeclose