How to Paint a Wall with Roller

How to Paint a Wall with Roller? Every color really has its own meaning. For your home décor, the color will represent the basic concept you want to create. Pink, blue, red, white, green and the others do influence different nuances to your designs in different ways. Sometimes, you are welcome to combine one another to make such charming atmosphere through perfect combination. In short, the colors you pick will help you to characterize your home. One of the most important aspects of coloring your home is the painting process. Without perfect process of painting, the color will never raise its beauty. Therefore, understanding the procedure of using certain painting tool is the one to be considered as well. In this case, let’s discuss the way of how to paint a wall with a roller.

how to paint a wall with a roller

how to paint a wall with a roller

How to Paint a Wall with Roller

Painting the wall by using a roller could be the most efficient option for faster and better painting results. However, it is quite tricky because wrong rolling movement will negatively influence the painting results. Here are the tips of how to paint a wall with a roller.

 Prepare the Tools

prepare the tools to paint a wall with a roller

prepare the tools to paint a wall with a roller

Before you start painting, you will need the following tools:

  • Paint roller
  • Sleeve or roller cover
  • Extension pole
  • Roller/ paint tray

Please find comprehensive references about the best tools you need to paint your wall using roller.

how to paint a wall with a roller preparation

how to paint a wall with a roller preparation

Preparation

  • Make sure that you prepare the room before you paint the wall. Save the furniture and clean the wall completely from dust or dirt for perfect process and results.
  • Dissolve the paint by mixing it with proper solvent. Read the direction given.
  • Pour the paint on the paint tray. You may use big bucket if you wish to have larger amount.
  • Rolling the roller on the paint completely. Do not make it too little or too much.

    paint a wall with a roller

    paint a wall with a roller

The Process

As the preparation has been done, it is the time to start painting the wall. You can start by painting the edges of the layer. Make sure that you paint them carefully to make sure that you do not paint other layers or the ceiling except you are going the paint them with the same color.

As you have paints the edges, you can continue the process by painting the walls. The best way of painting the wall is applying diagonal rolling or making it an “M” or a “W” pattern. In this case, you can start by painting downward or upward first based on your own. Make sure that you use light pressure to distribute the paint perfectly on the wall. Repeat the process till the whole wall is covered by the paint.

To finish the process, you will need to smooth the paint. Without reloading the roll, you can smooth the paint by rolling the roll on the painted surface. Again, you do not need to press it too hard for perfect result. Don’t forget to check whether there is dropping paint on the wall.

Finally, the painting process using paint roll is done. You need to wait until the paint dries perfectly before you reload the room. If you think that you do not have enough skill or time to paint the wall by your own, it is recommended to call someone to help you painting the wall.

Leave a Reply

Your email address will not be published. Required fields are marked *

You might also likeclose